We are running a 32 bit Fedora. That is most likely the problem.

Our listserv had been running v 16.0, which was apparently supported in 32 bit versions. Is that correct?

If so we will have to go back to 16.0 until the new server is ready.

Thanks to all,

Larry

> On Jul 22, 2018, at 1:31 AM, Ben Parker <[log in to unmask]> wrote:
> 
> On Sun, 22 Jul 2018 00:15:39 -0400, David Phillips <[log in to unmask]>
> wrote:
> 
>> gcc -o lsv lsv.o -O `echo "-lldap  -lldap -lclntsh -ldb2 "`; \ 
> 
> Well, this is the problem.  That command is all wrong.  Don't use the
> script.  Just manually re-link in your temp directory with the command:
> 
> gcc -O -o lsv lsv.o -lldap nocli.o nooci.o
> 
> If that produces errors then try
> 
> gcc -O -o lsv lsv.o -lldap -llber -lresolv nocli.o nooci.o
> 
> If you get a successful re-link then double check thus:
> 
> [root@install2]# ldd lsv
>        linux-vdso.so.1 =>  (0x00007ffd8733f000)
>        libldap-2.4.so.2 => /lib64/libldap-2.4.so.2 (0x00007f6578d41000)
>        liblber-2.4.so.2 => /lib64/liblber-2.4.so.2 (0x00007f6578b32000)
>        libresolv.so.2 => /lib64/libresolv.so.2 (0x00007f6578917000)
>        libc.so.6 => /lib64/libc.so.6 (0x00007f6578556000)
>        libsasl2.so.3 => /lib64/libsasl2.so.3 (0x00007f6578339000)
>        libssl3.so => /lib64/libssl3.so (0x00007f65780f6000)
>        libsmime3.so => /lib64/libsmime3.so (0x00007f6577ecf000)
>        libnss3.so => /lib64/libnss3.so (0x00007f6577ba9000)
>        libnssutil3.so => /lib64/libnssutil3.so (0x00007f657797c000)
>        libplds4.so => /lib64/libplds4.so (0x00007f6577778000)
>        libplc4.so => /lib64/libplc4.so (0x00007f6577573000)
>        libnspr4.so => /lib64/libnspr4.so (0x00007f6577334000)
>        libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f6577118000)
>        libdl.so.2 => /lib64/libdl.so.2 (0x00007f6576f14000)
>        /lib64/ld-linux-x86-64.so.2 (0x00007f6578f9b000)
>        libcrypt.so.1 => /lib64/libcrypt.so.1 (0x00007f6576cdc000)
>        libz.so.1 => /lib64/libz.so.1 (0x00007f6576ac6000)
>        librt.so.1 => /lib64/librt.so.1 (0x00007f65768bd000)
>        libfreebl3.so => /lib64/libfreebl3.so (0x00007f65766ba000)
> 
> Your libraries version numbers will likely be different but the result
> should look something like the above.
> 
> Commands to manually compile the other necessary LISTSERV utilities:
> 
> gcc -o lcmd lcmd.c -O -DSPOOL_DIR=\"/home/listserv/spool\"
> gcc -o lsv_amin lsv_amin.c -O -DSPOOL_DIR=\"/home/listserv/spool\"
> gcc -o jobview jobview.c -O
> gcc -o listview listview.c -O
> 
> Then to install all the files in their proper locations:
> 
> make update
> 
> ############################
> 
> To unsubscribe from the LSTSRV-L list:
> write to: mailto:[log in to unmask]
> or click the following link:
> http://peach.ease.lsoft.com/scripts/wa-PEACH.exe?SUBED1=LSTSRV-L&A=1
############################

To unsubscribe from the LSTSRV-L list:
write to: mailto:[log in to unmask]
or click the following link:
http://peach.ease.lsoft.com/scripts/wa-PEACH.exe?SUBED1=LSTSRV-L&A=1