Larry & I are working on this together, so I'll try to answer some of the
questions (I suspect he's asleep. I'm a night owl, but I'm about ready to
turn in. Also, Larry is the smarter, more experienced of the two of us.)
On Sun, Jul 22, 2018 at 12:06 AM Jacob Haller <[log in to unmask]>
wrote:
> I’m going to respond to things a bit out of order ...
>
> On Jul 21, 2018, at 7:29 PM, Lawrence Finch <[log in to unmask]>
> wrote:
>
> We are running a very old version of Fedora (17) so it may be an
> out-of-date library issue. We plan to switch to the new server soon. But
> it’s only lsv that fails to run. All of the other listserv executables
> start OK.
>
>
> I’m not very familiar with Fedora, so this may be a dumb question, but is
> this a 32-bit version of Linux? If so, the current LISTSERV version is
> only available in a 64-bit version, so that might be the problem.
>
It is a 64 bit Linux.
>
> If that isn’t the problem:
>
> We don’t need either (and don’t want either), and we did choose to exclude
> them during the installation.
>
>
> Can you send a copy of install.log, and/or a transcript of the
> installation process?
>
I don't think I can scroll back far enough for a transcript of the
installation process, but I'll put a copy of the install.log at the end of
this email.
>
> We copied the executable from another server where it does start. The lsv
> generated by this install is identical to the one on the other server
> (using cmp).
>
>
> If you use ldd to determine what libraries each lsv version is using, is
> the output different between the two copies of lsv?
>
I'll see if I can do that tonight, and if so, will put the answer in
another message.
>
> If we can’t get it up, is there an easy way to revert to a previous
> version? I see that there is a backup of it, but it doesn’t appear to be
> complete.
>
>
> If you made a backup of ~listserv/ before upgrading, then you could
> restore from that; or, if you still have the installer for the old LISTSERV
> version you were using, you could use that installer (as if you were doing
> an upgrade) to install the old version while maintaining your data. If
> neither is the case, then, I am guessing you installed LISTSERV using the
> .bin file — is that correct? If that’s the case, then I think you are
> probably talking about the contents of ~listserv/backup*. Can you send a
> directory listing for this location?
>
Here is the directory listing for the backup directory.
ls backup20180721200245/
go go2 go.sys home listserv-initd-script.sample lsv lsv-logger.pl
Makefile unixinst.html unixinst-sim.html
Here is the install.log file
if [ `uname` = 'SunOS' -a `uname -r | awk '{ if(\$1<5) printf("0"); else
printf("1") }'` = 1 ]; then \
make lsv_prog UNAME=Solaris; \
else \
make lsv_prog UNAME=`uname`; \
fi
make[1]: Entering directory `/tmp/LISTSERVinstall5662'
if [ "" = ")" ]; then \
gcc -o lsv lsv.o -O; \
else \
gcc -o lsv lsv.o -O `echo "-lldap -lldap -lclntsh -ldb2 "`; \
fi
/bin/ld: cannot find -lclntsh
/bin/ld: cannot find -ldb2
collect2: error: ld returned 1 exit status
make[1]: *** [lsv_prog] Error 1
make[1]: Leaving directory `/tmp/LISTSERVinstall5662'
make: *** [lsv] Error 2
if [ `uname` = 'SunOS' -a `uname -r | awk '{ if(\$1<5) printf("0"); else
printf("1") }'` = 1 ]; then \
make lsv_util UNAME=Solaris PROG=lsv_amin UMOD=4755 \
XOPT='-DSPOOL_DIR=\"/home/listserv/spool\"'; \
else \
make lsv_util UNAME=`uname` PROG=lsv_amin UMOD=4755 \
XOPT='-DSPOOL_DIR=\"/home/listserv/spool\"'; \
fi
make[1]: Entering directory `/tmp/LISTSERVinstall31854'
if [ "" = ")" ]; then \
gcc -o lsv_amin lsv_amin.c -O -DSPOOL_DIR=\"/home/listserv/spool\"; \
else \
gcc -o lsv_amin lsv_amin.c -O `echo ""` \
-DSPOOL_DIR=\"/home/listserv/spool\"; \
fi
if [ `/bin/whoami` != "listserv" ]; \
then chown listserv lsv_amin; \
else true; \
fi
if [ ".4755" != "." ]; then chmod 4755 lsv_amin; fi
make[1]: Leaving directory `/tmp/LISTSERVinstall31854'
if [ `uname` = 'SunOS' -a `uname -r | awk '{ if(\$1<5) printf("0"); else
printf("1") }'` = 1 ]; then \
make lsv_util UNAME=Solaris PROG=lcmd UMOD=4755 \
XOPT='-DSPOOL_DIR=\"/home/listserv/spool\"'; \
else \
make lsv_util UNAME=`uname` PROG=lcmd UMOD=4755 \
XOPT='-DSPOOL_DIR=\"/home/listserv/spool\"'; \
fi
make[1]: Entering directory `/tmp/LISTSERVinstall31854'
if [ "" = ")" ]; then \
gcc -o lcmd lcmd.c -O -DSPOOL_DIR=\"/home/listserv/spool\"; \
else \
gcc -o lcmd lcmd.c -O `echo ""` \
-DSPOOL_DIR=\"/home/listserv/spool\"; \
fi
if [ `/bin/whoami` != "listserv" ]; \
then chown listserv lcmd; \
else true; \
fi
if [ ".4755" != "." ]; then chmod 4755 lcmd; fi
make[1]: Leaving directory `/tmp/LISTSERVinstall31854'
if [ `uname` = 'SunOS' -a `uname -r | awk '{ if(\$1<5) printf("0"); else
printf("1") }'` = 1 ]; then \
make lsv_util UNAME=Solaris PROG=jobview; \
else \
make lsv_util UNAME=`uname` PROG=jobview; \
fi
make[1]: Entering directory `/tmp/LISTSERVinstall31854'
if [ "" = ")" ]; then \
gcc -o jobview jobview.c -O ; \
else \
gcc -o jobview jobview.c -O `echo ""` \
; \
fi
if [ `/bin/whoami` != "listserv" ]; \
then chown listserv jobview; \
else true; \
fi
if [ "." != "." ]; then chmod 4755 jobview; fi
make[1]: Leaving directory `/tmp/LISTSERVinstall31854'
if [ `uname` = 'SunOS' -a `uname -r | awk '{ if(\$1<5) printf("0"); else
printf("1") }'` = 1 ]; then \
make lsv_util UNAME=Solaris PROG=lsv_amin UMOD=4755 \
XOPT='-DSPOOL_DIR=\"/home/listserv/spool\"'; \
else \
make lsv_util UNAME=`uname` PROG=lsv_amin UMOD=4755 \
XOPT='-DSPOOL_DIR=\"/home/listserv/spool\"'; \
fi
make[1]: Entering directory `/tmp/LISTSERVinstall5955'
if [ "" = ")" ]; then \
gcc -o lsv_amin lsv_amin.c -O -DSPOOL_DIR=\"/home/listserv/spool\"; \
else \
gcc -o lsv_amin lsv_amin.c -O `echo ""` \
-DSPOOL_DIR=\"/home/listserv/spool\"; \
fi
if [ `/bin/whoami` != "listserv" ]; \
then chown listserv lsv_amin; \
else true; \
fi
if [ ".4755" != "." ]; then chmod 4755 lsv_amin; fi
make[1]: Leaving directory `/tmp/LISTSERVinstall5955'
if [ `uname` = 'SunOS' -a `uname -r | awk '{ if(\$1<5) printf("0"); else
printf("1") }'` = 1 ]; then \
make lsv_util UNAME=Solaris PROG=lcmd UMOD=4755 \
XOPT='-DSPOOL_DIR=\"/home/listserv/spool\"'; \
else \
make lsv_util UNAME=`uname` PROG=lcmd UMOD=4755 \
XOPT='-DSPOOL_DIR=\"/home/listserv/spool\"'; \
fi
make[1]: Entering directory `/tmp/LISTSERVinstall5955'
if [ "" = ")" ]; then \
gcc -o lcmd lcmd.c -O -DSPOOL_DIR=\"/home/listserv/spool\"; \
else \
gcc -o lcmd lcmd.c -O `echo ""` \
-DSPOOL_DIR=\"/home/listserv/spool\"; \
fi
if [ `/bin/whoami` != "listserv" ]; \
then chown listserv lcmd; \
else true; \
fi
if [ ".4755" != "." ]; then chmod 4755 lcmd; fi
make[1]: Leaving directory `/tmp/LISTSERVinstall5955'
if [ `uname` = 'SunOS' -a `uname -r | awk '{ if(\$1<5) printf("0"); else
printf("1") }'` = 1 ]; then \
make lsv_util UNAME=Solaris PROG=jobview; \
else \
make lsv_util UNAME=`uname` PROG=jobview; \
fi
make[1]: Entering directory `/tmp/LISTSERVinstall5955'
if [ "" = ")" ]; then \
gcc -o jobview jobview.c -O ; \
else \
gcc -o jobview jobview.c -O `echo ""` \
; \
fi
if [ `/bin/whoami` != "listserv" ]; \
then chown listserv jobview; \
else true; \
fi
if [ "." != "." ]; then chmod 4755 jobview; fi
make[1]: Leaving directory `/tmp/LISTSERVinstall5955'
[listserv@shelmerston ~]$ less install.log
[listserv@shelmerston ~]$ cat install.log
if [ `uname` = 'SunOS' -a `uname -r | awk '{ if(\$1<5) printf("0"); else
printf("1") }'` = 1 ]; then \
make lsv_prog UNAME=Solaris; \
else \
make lsv_prog UNAME=`uname`; \
fi
make[1]: Entering directory `/tmp/LISTSERVinstall5662'
if [ "" = ")" ]; then \
gcc -o lsv lsv.o -O; \
else \
gcc -o lsv lsv.o -O `echo "-lldap -lldap -lclntsh -ldb2 "`; \
fi
/bin/ld: cannot find -lclntsh
/bin/ld: cannot find -ldb2
collect2: error: ld returned 1 exit status
make[1]: *** [lsv_prog] Error 1
make[1]: Leaving directory `/tmp/LISTSERVinstall5662'
make: *** [lsv] Error 2
if [ `uname` = 'SunOS' -a `uname -r | awk '{ if(\$1<5) printf("0"); else
printf("1") }'` = 1 ]; then \
make lsv_util UNAME=Solaris PROG=lsv_amin UMOD=4755 \
XOPT='-DSPOOL_DIR=\"/home/listserv/spool\"'; \
else \
make lsv_util UNAME=`uname` PROG=lsv_amin UMOD=4755 \
XOPT='-DSPOOL_DIR=\"/home/listserv/spool\"'; \
fi
make[1]: Entering directory `/tmp/LISTSERVinstall31854'
if [ "" = ")" ]; then \
gcc -o lsv_amin lsv_amin.c -O -DSPOOL_DIR=\"/home/listserv/spool\"; \
else \
gcc -o lsv_amin lsv_amin.c -O `echo ""` \
-DSPOOL_DIR=\"/home/listserv/spool\"; \
fi
if [ `/bin/whoami` != "listserv" ]; \
then chown listserv lsv_amin; \
else true; \
fi
if [ ".4755" != "." ]; then chmod 4755 lsv_amin; fi
make[1]: Leaving directory `/tmp/LISTSERVinstall31854'
if [ `uname` = 'SunOS' -a `uname -r | awk '{ if(\$1<5) printf("0"); else
printf("1") }'` = 1 ]; then \
make lsv_util UNAME=Solaris PROG=lcmd UMOD=4755 \
XOPT='-DSPOOL_DIR=\"/home/listserv/spool\"'; \
else \
make lsv_util UNAME=`uname` PROG=lcmd UMOD=4755 \
XOPT='-DSPOOL_DIR=\"/home/listserv/spool\"'; \
fi
make[1]: Entering directory `/tmp/LISTSERVinstall31854'
if [ "" = ")" ]; then \
gcc -o lcmd lcmd.c -O -DSPOOL_DIR=\"/home/listserv/spool\"; \
else \
gcc -o lcmd lcmd.c -O `echo ""` \
-DSPOOL_DIR=\"/home/listserv/spool\"; \
fi
if [ `/bin/whoami` != "listserv" ]; \
then chown listserv lcmd; \
else true; \
fi
if [ ".4755" != "." ]; then chmod 4755 lcmd; fi
make[1]: Leaving directory `/tmp/LISTSERVinstall31854'
if [ `uname` = 'SunOS' -a `uname -r | awk '{ if(\$1<5) printf("0"); else
printf("1") }'` = 1 ]; then \
make lsv_util UNAME=Solaris PROG=jobview; \
else \
make lsv_util UNAME=`uname` PROG=jobview; \
fi
make[1]: Entering directory `/tmp/LISTSERVinstall31854'
if [ "" = ")" ]; then \
gcc -o jobview jobview.c -O ; \
else \
gcc -o jobview jobview.c -O `echo ""` \
; \
fi
if [ `/bin/whoami` != "listserv" ]; \
then chown listserv jobview; \
else true; \
fi
if [ "." != "." ]; then chmod 4755 jobview; fi
make[1]: Leaving directory `/tmp/LISTSERVinstall31854'
if [ `uname` = 'SunOS' -a `uname -r | awk '{ if(\$1<5) printf("0"); else
printf("1") }'` = 1 ]; then \
make lsv_util UNAME=Solaris PROG=lsv_amin UMOD=4755 \
XOPT='-DSPOOL_DIR=\"/home/listserv/spool\"'; \
else \
make lsv_util UNAME=`uname` PROG=lsv_amin UMOD=4755 \
XOPT='-DSPOOL_DIR=\"/home/listserv/spool\"'; \
fi
make[1]: Entering directory `/tmp/LISTSERVinstall5955'
if [ "" = ")" ]; then \
gcc -o lsv_amin lsv_amin.c -O -DSPOOL_DIR=\"/home/listserv/spool\"; \
else \
gcc -o lsv_amin lsv_amin.c -O `echo ""` \
-DSPOOL_DIR=\"/home/listserv/spool\"; \
fi
if [ `/bin/whoami` != "listserv" ]; \
then chown listserv lsv_amin; \
else true; \
fi
if [ ".4755" != "." ]; then chmod 4755 lsv_amin; fi
make[1]: Leaving directory `/tmp/LISTSERVinstall5955'
if [ `uname` = 'SunOS' -a `uname -r | awk '{ if(\$1<5) printf("0"); else
printf("1") }'` = 1 ]; then \
make lsv_util UNAME=Solaris PROG=lcmd UMOD=4755 \
XOPT='-DSPOOL_DIR=\"/home/listserv/spool\"'; \
else \
make lsv_util UNAME=`uname` PROG=lcmd UMOD=4755 \
XOPT='-DSPOOL_DIR=\"/home/listserv/spool\"'; \
fi
make[1]: Entering directory `/tmp/LISTSERVinstall5955'
if [ "" = ")" ]; then \
gcc -o lcmd lcmd.c -O -DSPOOL_DIR=\"/home/listserv/spool\"; \
else \
gcc -o lcmd lcmd.c -O `echo ""` \
-DSPOOL_DIR=\"/home/listserv/spool\"; \
fi
if [ `/bin/whoami` != "listserv" ]; \
then chown listserv lcmd; \
else true; \
fi
if [ ".4755" != "." ]; then chmod 4755 lcmd; fi
make[1]: Leaving directory `/tmp/LISTSERVinstall5955'
if [ `uname` = 'SunOS' -a `uname -r | awk '{ if(\$1<5) printf("0"); else
printf("1") }'` = 1 ]; then \
make lsv_util UNAME=Solaris PROG=jobview; \
else \
make lsv_util UNAME=`uname` PROG=jobview; \
fi
make[1]: Entering directory `/tmp/LISTSERVinstall5955'
if [ "" = ")" ]; then \
gcc -o jobview jobview.c -O ; \
else \
gcc -o jobview jobview.c -O `echo ""` \
; \
fi
if [ `/bin/whoami` != "listserv" ]; \
then chown listserv jobview; \
else true; \
fi
if [ "." != "." ]; then chmod 4755 jobview; fi
make[1]: Leaving directory `/tmp/LISTSERVinstall5955'
--
David Phillips
At or about 36° 08' 47" N , 80° 19' 23" W
Lose Not A Minute!
zerocancer.org
############################
To unsubscribe from the LSTSRV-L list:
write to: mailto:[log in to unmask]
or click the following link:
http://peach.ease.lsoft.com/scripts/wa-PEACH.exe?SUBED1=LSTSRV-L&A=1
|
